heat treatment的例句大全

Chinese medicine treatment of febrile diseases has obvious advantages, butare still using a simple bitter cold heat mainly.

而中医中药治疗发热性疾病具有明显的优势，但目前大多仍以单纯的苦寒清热法为主。

Heat Treatment Process Design for Guide and Guard Plate of Wire Rolling Mill

线材轧机导卫板热处理工艺的制定

He strength and ductility of low carbon cold drawn steel wire can be obviously increased by heat-treatment.

用普通低碳冷拔钢丝经热处理，提高钢丝的强度，增加其延伸性，使钢丝能够更有效地满足混凝土预制构件的要求。

Heat Treatment Between Phase Transition Intersections to Improve the Property of BHW 35 Steel

相交点间热处理改善BHW35钢性能的研究

Non-type diabetic account 85 % of all patients. The treatment type should be clearing heat-toxicity , eliminating dampness.

非 缺血性的占糖尿病足总数的85%左右, 治疗应以清热解毒利湿为主.

Effect of heat treatment on bonding strength of Ni-Al coating to A3 steel

热处理对Ni-Al涂层与A3钢结合强度的影响

This method of vacuum heat-treatment is therefore regarded as an effective process for die steel D2.

从而证明这是提高D2钢冷作模具的一种有效热处理工艺。

Analysis of Heat Treatment Process Problem During Production and Inspection of F4 Steel

T4钢生产检验中热处理工艺问题分析

For this reason, special inductor and fixture have been designed and the heat treatment problem of the reverse fork has been successfully solved by double high frequency quenching.

为此，设计制造了特殊的感应器和工装夹具，采用二次高频淬火工艺解决了该倒挡拨叉的热处理难题。

In this paper capsule history about development of powerful CO_2 lasers and microprocessor-controlled positioning systems in China are described, and listed some examples in applications, including heat treatment, cutting and welding, and the situation of importing technology and international cooperation are introduced.

本文恼述我国中、高功率CO2激光器及加工机发展历程，列举了其在热处理、切割与焊接方面应用现状，介绍了技术引进及国际合作情况。

The treatment strategy for contact dermatitis is to clear heat and drain dampness, and relieve toxicity.

接触性皮炎的治疗原则是清热,除湿, 解毒.

Then, the effects of heat treatment and temperature on the chemical composition and sheet resistance of the prepared films were investigated by XRD, EDXS and sheet resistance measurements.

利用X射线衍射和能量散射X射线能谱表征方法，并结合薄膜方块电阻的测定，探讨了热处理方式和热处理温度对薄膜化学组成及薄膜电阻的影响。

Has carried on many kinds of engineer testing to 35 CeMo steel, discovered ideally enhanced the obdurability compound heat treatment method, this method might enable 35 CeMo steel while to have high strength, also had the high resilience.

对35CeMo钢进行了多种工艺试验，找出了较理想的提高强韧性的复合热处理方法，该方法可使35CeMo钢在具有高强度的同时，又具有较高的冲击韧性。

Heat Treatment for Stabilizer Column& Desorption Tower Girth Welding in the Air

稳定塔、脱吸塔空中组对环口的热处理工艺及措施

The effects of different heat treatment on protein quality of detoxified Tung cake ( meal)( DTC ⅱ,ⅲ, DTM ⅰ) were studied by protein solubility index and dialysis tube method in vitro.

通过蛋白质溶解度（PS）指标和体外透析管法测定了不同热处理对脱毒桐饼（粕）蛋白质品质的影响。

The microstructure and tensile/ impact properties of a new type metastable beta titanium alloy ( insert composition here, Ti-B20) under different heat treatment conditions were studied.

研究了1种新型的亚稳定钛合金（Ti-B20）在不同热处理制度下的显微组织与拉伸和冲击性能。

Based on development need of overhead conductors, the study of all aluminum alloy conductor ( AAAC) with high strength and heat-resistance, including melting, rolling, pulling, and middle-treatment process, was explained in detail.

针对架空导线的发展需要，从铝合金导线的熔炼、轧制、拉制及中间处理等方面，分析了高强耐热全铝合金导线的研究与开发。

After heat treatment, UTS and YTS of RS bars did not change obviously, the E% improved 5.6 times.

热处理后，快速凝固挤压棒材的抗拉强度和屈服强度均没有明显变化，伸长率却提高了5.6倍。

Influence of Heat Treatment on Lubricated Frictional Wear Properties of In-situ VCp/ Fe Composite

热处理对原位自生VCp/Fe复合材料的油润滑摩擦磨损性能影响的研究

Non ferrous metals, aluminium alloy ( LY12) and aluminium bronzes ( QAl 9 1 1 5), can be used as slot wedges of generator rotors. Their management and properties are mainly determined by suitable techniques of heat treatment.

有色金属材料铝合金（LY12）和铝青铜（QAl9115）用作发电机转子槽楔，其性能主要由合适的热处理工艺决定。